Preparation of Digestion-Tracking Bacteria: Difference between revisions

From Heit Lab Wiki
Jump to navigation Jump to search
mNo edit summary
(New protocol with new bacteria and known OD600s)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
# Measure out 4 mL of LB media and add kanamycin to a final concentration of 50 µg/mL.
===New Protocol===


# Inoculate with the Bacteria Digest 1 (Clone RC-094) bacteria, and grow overnight shaking at 37°C.  
====Materials:====
# The next morning prepare 40 mL of LB media with 50 µg/mL kanamycin, and inoculate using the whole 4 mL overnight culture prepared in step 2. Incubate, shaking at 37°C, for 1.5 hours.  
 
# At the 1.5 hour mark, add 1 mM IPTG and 25 µM biliverdin. Return to the shaker and incubate at 37°C, for 4 hours.  
*One of:
# At 4 hours remove the flask from the shaker. Prepare a serial dilution, and prepare spread plates on LB-Kan of the 10<sup>-9</sup>, 10<sup>-10</sup>, 10<sup>-11</sup>, 10<sup>-12</sup>
**RFP BL21 ''E. coli'' (RC-105, kanamycin resistant)
# Recover the cells by centrifugation, wash once with PBS, and then store in the fridge in 1.5 mL PBS + 25 µM biliverdin.  
** GFP BL21 ''E. coli'' (RC-108, ampicillin resistant)
# The next day use the serial dilution to calculate the CFU/mL in the refrigerator stock. Dilute the stock to 10 x 10<sup>7</sup>/mL in PBS + 20% glycerol, aliquot into PCR tubes (200 µL/tube) and freeze at -80°C until needed.
**GFP + RFP BL21 ''E. coli'' (RC-110, kanamycin + ampicillin resistant)
**RFP+smURF BL21 ''E. coli'' (RC-094, kanamycin resistant)
* LB medium
*1,000X stocks of the appropriate antibiotic(s)
**50 mg/mL kanamycin
** 100 mg/mL ampicillin
*1,000X stock of IPTG (1 M, 0.238g/mL)
*25 mM stock solution of biliverdin if using RC-094 or another smURF containing vector
 
====Preparing the Bacteria:====
 
#Prepare ~2 mL of LB + the appropriate antibiotic(s) at a 1X concentration in a 14 mL snap-cap tube.
#Inoculate with a loop of the desired bacteria from the frozen stock.
#Grow overnight, 37°C, shaking.
#Prepare 2 mL of fresh LB + sufficient antibiotics for 2.5 mL of medium in a 14 mL snap-cap tube.
#Inoculate this new tube with 400 µL of the overnight culture.
#Grow for 1 hr, 37°C, shaking.
#Add 2.5 µL IPTG to the culture. 
#*If using a smURF-containing bacteria, add 2.5 µL (25 µM) biliverdin at this time.
#Incubate overnight, 37°C, shaking.
#Make a 1:10 dilution of the bacteria into LB with a minimum volume of 150 µL. Use this to measure the OD<sub>600</sub> of the culture (see '''Table 1''').
#Remove 1 x 10<sup>8</sup> bacteria from this culture, dilute to 1 mL in PBS, and pellet by centrifugation. Remove the supernatant, resuspend in 1 mL of PBS, and repellet.
#Suspend the bacterial pellet in 700 µL of PBS, and add to this 300 µL of 16% PFA. Incubate at room temperature, in the dark, for 30 min.
#Pellet by centrifugation, remove the supernatant, resuspend in 1 mL of PBS, and repellet.
#Resuspend in 1 mL of PBS (e.g. 1 x 10<sup>8</sup> bacteria/mL). Store at 4°C, wrapped in foil, for up to 1 week.
#Bacteria are typically added to phagocytosis assays at a rate of 10-30/macrophage, or 10,000-30,000 per mm<sup>2</sup> ('''Table 2''').
#*Add desired number of bacteria into the dish/well.
#*Mix gently with a pipette to distribute the bacteria evenly.
#*If synchronized phagocytosis is required, spin at ~250 x g, 1 min, in the centrifuge.
#*Proceed with assay as required.
 
{| class="wikitable"
|+'''Table 1:''' '''CFU/OD600 of Various Bacterial Strains'''
!Bacteria
!Stock
!CFU/mL/OD<sub>600</sub>
|-
|DH5α
| --
|2.7 x 10<sup>9</sup> CFU/mL/OD<sub>600</sub>
|-
|BL21
| --
|8.0 x 10<sup>8</sup> CFU/mL/OD<sub>600</sub>
|-
|RFP
|RC-105
|1.6 x 10<sup>8</sup> CFU/mL/OD<sub>600</sub>
|-
|GFP
|RC-108
|*
|-
|GFP+RFP
|RC-110
|4.4 x 10<sup>8</sup> CFU/mL/OD<sub>600</sub>
|-
|RFP+smURF
|RC-094
|*
|}
''*Not yet determined''
 
{| class="wikitable"
|+Table 2: Common Bacterial Additions for Phagocytosis Assays
!Chamber
!Well diameter/side
!Well area
!Low (10k/mm<sup>2</sup>)
!High (30k/mm<sup>2</sup>)
|-
|12-well plate
|18 mm (coverslip)
|~250 mm<sup>2</sup>
|2.5 x 10<sup>6</sup>
|7.5 x 10<sup>6</sup>
|-
|35 mm dish
|34.4 mm (dish)
|930 mm<sup>2</sup>
|9.3 x 10<sup>6</sup>
|2.8 x 10<sup>7</sup>
|-
|µ-Slide 18 Well
|5.7 x 6.1 mm
|35 mm<sup>2</sup>
|350,000
|1.0 x 10<sup>6</sup>
|-
|21-well chamber
|5 mm
|20 mm<sup>2</sup>
|200,000
|600,000
|-
|32-well chamber
|4.5 mm
|16 mm<sup>2</sup>
|160,000
|480,000
|-
|36-well chamber
|4.0 mm
|12.6 mm<sup>2</sup>
|126,000
|378,000
|}
----
 
===Old Protocol===
#Measure out 4 mL of LB media and add kanamycin to a final concentration of 50 µg/mL.
 
#Inoculate with the Bacteria Digest 1 (Clone RC-094) bacteria, and grow overnight shaking at 37°C.
#The next morning prepare 40 mL of LB media with 50 µg/mL kanamycin, and inoculate using the whole 4 mL overnight culture prepared in step 2. Incubate, shaking at 37°C, for 1.5 hours.
#At the 1.5 hour mark, add 1 mM IPTG and 25 µM biliverdin. Return to the shaker and incubate at 37°C, for 4 hours.
#At 4 hours remove the flask from the shaker. Prepare a serial dilution, and prepare spread plates on LB-Kan of the 10<sup>-9</sup>, 10<sup>-10</sup>, 10<sup>-11</sup>, 10<sup>-12</sup>
#Recover the cells by centrifugation, wash once with PBS, and then store in the fridge in 1.5 mL PBS + 25 µM biliverdin.
#The next day use the serial dilution to calculate the CFU/mL in the refrigerator stock. Dilute the stock to 10 x 10<sup>7</sup>/mL in PBS + 20% glycerol, aliquot into PCR tubes (200 µL/tube) and freeze at -80°C until needed.




To use Digestion-Tracking Bacteria in a phagocytosis assay:
To use Digestion-Tracking Bacteria in a phagocytosis assay:


# Split MH-S cells onto coverslips (250,000 cells/well), and let recover overnight in 37°C incubator.  
#Split MH-S cells onto coverslips (250,000 cells/well), and let recover overnight in 37°C incubator.
# The next morning, discard the media in the wells and replace with 400 μL fresh RPMI media, with 6 μL antibiotic antimycotic solution (10,000 IU/mL penicillin, 10,000 μg/mL streptomycin, 25 μg/mL amphotericin B)  
#The next morning, discard the media in the wells and replace with 400 μL fresh RPMI media, with 6 μL antibiotic antimycotic solution (10,000 IU/mL penicillin, 10,000 μg/mL streptomycin, 25 μg/mL amphotericin B)
# The next morning, thaw 1 tube of Digest Tracking bacteria and add entire tube to a 1.5 mL centrifuge tube. Fill the rest of the tube’s volume with PBS.  
#Thaw 1 tube of Digest Tracking bacteria and add entire tube to a 1.5 mL centrifuge tube. Fill the rest of the tube’s volume with PBS.
# Centrifuge tube at 21,100 g for 3 minutes.  
#Centrifuge tube at 21,100 g for 3 minutes.
# Carefully remove supernatant and resuspend pellet in 200 μL imaging buffer.  
#Carefully remove supernatant and resuspend pellet in 200 μL imaging buffer.
# Add entire tube to coverslip, and live cell image.
#Add entire tube to coverslip, and live cell image.

Latest revision as of 13:31, 18 May 2023

New Protocol

Materials:

  • One of:
    • RFP BL21 E. coli (RC-105, kanamycin resistant)
    • GFP BL21 E. coli (RC-108, ampicillin resistant)
    • GFP + RFP BL21 E. coli (RC-110, kanamycin + ampicillin resistant)
    • RFP+smURF BL21 E. coli (RC-094, kanamycin resistant)
  • LB medium
  • 1,000X stocks of the appropriate antibiotic(s)
    • 50 mg/mL kanamycin
    • 100 mg/mL ampicillin
  • 1,000X stock of IPTG (1 M, 0.238g/mL)
  • 25 mM stock solution of biliverdin if using RC-094 or another smURF containing vector

Preparing the Bacteria:

  1. Prepare ~2 mL of LB + the appropriate antibiotic(s) at a 1X concentration in a 14 mL snap-cap tube.
  2. Inoculate with a loop of the desired bacteria from the frozen stock.
  3. Grow overnight, 37°C, shaking.
  4. Prepare 2 mL of fresh LB + sufficient antibiotics for 2.5 mL of medium in a 14 mL snap-cap tube.
  5. Inoculate this new tube with 400 µL of the overnight culture.
  6. Grow for 1 hr, 37°C, shaking.
  7. Add 2.5 µL IPTG to the culture.
    • If using a smURF-containing bacteria, add 2.5 µL (25 µM) biliverdin at this time.
  8. Incubate overnight, 37°C, shaking.
  9. Make a 1:10 dilution of the bacteria into LB with a minimum volume of 150 µL. Use this to measure the OD600 of the culture (see Table 1).
  10. Remove 1 x 108 bacteria from this culture, dilute to 1 mL in PBS, and pellet by centrifugation. Remove the supernatant, resuspend in 1 mL of PBS, and repellet.
  11. Suspend the bacterial pellet in 700 µL of PBS, and add to this 300 µL of 16% PFA. Incubate at room temperature, in the dark, for 30 min.
  12. Pellet by centrifugation, remove the supernatant, resuspend in 1 mL of PBS, and repellet.
  13. Resuspend in 1 mL of PBS (e.g. 1 x 108 bacteria/mL). Store at 4°C, wrapped in foil, for up to 1 week.
  14. Bacteria are typically added to phagocytosis assays at a rate of 10-30/macrophage, or 10,000-30,000 per mm2 (Table 2).
    • Add desired number of bacteria into the dish/well.
    • Mix gently with a pipette to distribute the bacteria evenly.
    • If synchronized phagocytosis is required, spin at ~250 x g, 1 min, in the centrifuge.
    • Proceed with assay as required.
Table 1: CFU/OD600 of Various Bacterial Strains
Bacteria Stock CFU/mL/OD600
DH5α -- 2.7 x 109 CFU/mL/OD600
BL21 -- 8.0 x 108 CFU/mL/OD600
RFP RC-105 1.6 x 108 CFU/mL/OD600
GFP RC-108 *
GFP+RFP RC-110 4.4 x 108 CFU/mL/OD600
RFP+smURF RC-094 *

*Not yet determined

Table 2: Common Bacterial Additions for Phagocytosis Assays
Chamber Well diameter/side Well area Low (10k/mm2) High (30k/mm2)
12-well plate 18 mm (coverslip) ~250 mm2 2.5 x 106 7.5 x 106
35 mm dish 34.4 mm (dish) 930 mm2 9.3 x 106 2.8 x 107
µ-Slide 18 Well 5.7 x 6.1 mm 35 mm2 350,000 1.0 x 106
21-well chamber 5 mm 20 mm2 200,000 600,000
32-well chamber 4.5 mm 16 mm2 160,000 480,000
36-well chamber 4.0 mm 12.6 mm2 126,000 378,000

Old Protocol

  1. Measure out 4 mL of LB media and add kanamycin to a final concentration of 50 µg/mL.
  1. Inoculate with the Bacteria Digest 1 (Clone RC-094) bacteria, and grow overnight shaking at 37°C.
  2. The next morning prepare 40 mL of LB media with 50 µg/mL kanamycin, and inoculate using the whole 4 mL overnight culture prepared in step 2. Incubate, shaking at 37°C, for 1.5 hours.
  3. At the 1.5 hour mark, add 1 mM IPTG and 25 µM biliverdin. Return to the shaker and incubate at 37°C, for 4 hours.
  4. At 4 hours remove the flask from the shaker. Prepare a serial dilution, and prepare spread plates on LB-Kan of the 10-9, 10-10, 10-11, 10-12
  5. Recover the cells by centrifugation, wash once with PBS, and then store in the fridge in 1.5 mL PBS + 25 µM biliverdin.
  6. The next day use the serial dilution to calculate the CFU/mL in the refrigerator stock. Dilute the stock to 10 x 107/mL in PBS + 20% glycerol, aliquot into PCR tubes (200 µL/tube) and freeze at -80°C until needed.


To use Digestion-Tracking Bacteria in a phagocytosis assay:

  1. Split MH-S cells onto coverslips (250,000 cells/well), and let recover overnight in 37°C incubator.
  2. The next morning, discard the media in the wells and replace with 400 μL fresh RPMI media, with 6 μL antibiotic antimycotic solution (10,000 IU/mL penicillin, 10,000 μg/mL streptomycin, 25 μg/mL amphotericin B)
  3. Thaw 1 tube of Digest Tracking bacteria and add entire tube to a 1.5 mL centrifuge tube. Fill the rest of the tube’s volume with PBS.
  4. Centrifuge tube at 21,100 g for 3 minutes.
  5. Carefully remove supernatant and resuspend pellet in 200 μL imaging buffer.
  6. Add entire tube to coverslip, and live cell image.